Lesna TIP Otiški vrh d.d. Šentjanž pri Dravogradu 133, SI 2373 Šentjanž pri Dravogradu
T: +386 2 87 87 501
F: +386 2 87 87 510
Ekonip E1 P5
Raw chipboards EKONIP E1 P5 are carrying chipboards appropriate for using in places with increased humidity. Their main characteristics are extremely low surface resistance, high bend and internal bond strength and high resistance to humidity. They can be used for all kinds of further treating.
Raw chipboard panels EKONIP E1 P5 are manufactured according to all mentioned standards and systems of quality and also with SIST EN 13986.
Load tables:
| dimension (mm) | Board thickness (mm) | |||||||||||||
| 8 | 10 | 12 | 13 | 16 | 18 | 19 | 22 | 25 | 28 | 30 | 32 | 34 | 35 | |
| 5600 x 2070 | * | * | * | * | * | * | * | * | ||||||
| Standard Pack | ||||||||||||||
| pack (kom.) | 80 | 65 | 50 | 45 | 40 | 35 | 30 | |||||||
| Pack weight (kg) | 6560 | 6435 | 6200 | 6255 | 5840 | 5705 | 5580 | |||||||
| pack volume (m3) | 8,2 | 8,2 | 8,2 | 8,2 | 8,2 | 8,2 | 8,2 | |||||||
| 2800 x 2070 | * | * | * | * | * | * | * | * | ||||||
| Standard Pack | ||||||||||||||
| pack (kom.) | 80 | 65 | 50 | 45 | 40 | 35 | 30 | |||||||
| Pack weight (kg) | 3280 | 3218 | 3100 | 3128 | 2920 | 2853 | 2790 | |||||||
| pack volume (m3) | 4,1 | 4,1 | 4,1 | 4,1 | 4,1 | 4,1 | 4,1 | |||||||
Technical data sheet:
| characteristics | Testing with accordance to | unit | SIST EN 312 demand 5 percentiles (calculated for SIST EN 326-1) | |||||
| Board thicknesses (mm) | ||||||||
| >4-6 | >6-13 | >13 -20 | >20 - 25 | >25 - 32 | >32-40 | |||
| Bending strenght | SIST EN 310 | N/mm2 | 19 | 18 | 16 | 14 | 12 | 10 |
| layer strength | S1ST EN 319 | N/mm2 | 0,50 | 0,45 | 0,45 | 0,40 | 0,35 | 0,30 |
| layer strength after cooking | S1ST EN 1087 - 1 | N/mm2 | 0,15 | 0,15 | 0,14 | 0,12 | 0,11 | 0,10 |
| modul elasticity | SIST EN 310 | N/mm2 | 2550 | 2550 | 2400 | 2150 | 1900 | 1700 |
| resistance surface | SIST EN 317 | N/mm2 | 12 | 11 | 10 | 10 | 10 | 9 |
General demands and tolerances:
| General demands and tolerances: | Testing with accordance to | unit |
| Thickness tolerance (sanded boards) | SIST EN 324 - 1 | 1 ± 0,3 mm |
| Lenght and width | SIST EN 324 - 1 | ±5 mm |
| Edge straightness | SIST EN 324 - 2 | 1,5 mm/m |
| squareness | SIST EN 324 - 2 | 2mm/m |
| hunidity | SIST EN 322 | 5% -13% |
| nominal volume mass | SIST EN 232 | ±10% |
| formaldehid | SIST EN 120 | razred E1 (pod 8g/100gj |
Applications / Areas of use:
Furniture industry:
- both side veneering,
- post forming
- lacquering,
- padding
- for bathrooms or other places with higher humidity
- other…
Building industry:
- as partition walls,
- for individual concrete formwork,
- for formwork in attic rooms,
- for flooring boards,
- in shipbuilding for inner equipment,
- for laying in containers…
